US / ALLIED MK-84

This is a unit of the Department Of Defense - United States of America (USA)
Status
The first post in this thread is a WikiPost, and can be edited by anyone with the appropriate permissions.
MK-84

1682370296387.png


General Info:

Type = Low Drag General Purpose Origin = U.S.A.
Manufacture = Nad Crane IOC = 1950s
Guidance = Ballistic
Platforms = A-10A, B-1B, B-52H, F-4G, F-15A-E, F-16A-D, F-111D-F, F-117A

Performance:
Range = Gravity bomb
Drag = 9
Lethal Radius = 3,000ft
Min Release Alt = 1,480ft
MSD, protected = 800ft
MSD, exposed = 3,250ft

Dimensions:
Length = 153in
Diameter = 18in
Fin Span = 25in
Weight = 1,970lbs

Warhead:
Weight = 945lbs Tritonal, Minol II, or H-6
Fuse = Impact

The MK-84 is a free-fall, nonguided GP 2,000-pound bomb. The MK 80 series Low Drag General Purpose (LDGP) bombs are used in the majority of bombing operations where maximum blast and explosive effects are desired. LDGP bombs are designed to be aerodynamically streamlined. Their cases are relatively light and approximately 45 percent of their complete weight is explosive. General purpose bombs may use both nose and tail fuzes and conical or retarded tail fins. Normal fuzes are the mechanical M904 (nose) and the M905 (tail). Most of the over 12,000 MK-84s expended during Desert Storm were dropped by Air Force F-15Es, F-16s and F-111Fs; less than 1,000 of the total were dropped by Marine Corps tactical aircraft.

The MK84 AIR is a 2,000 pound bomb modified with a BSU-50/B high drag tail assembly. The "ballute" air bag which deploys from the tail provides a high speed, low altitude delivery capability by quickly slowing the bomb and allowing the aircraft to escape the blast pattern. The tail assembly consists of a low-drag canister unit containing a ballute (combination balloon and parachute), and a release lanyard assembly that opens the canister releasing the ballute. The ballute assembly is made from high strength low porosity nylon fabric. When the bomb is released from the aircraft a lanyard unlatches the back cover which opens, releasing part of the nylon bag/retarder. Air turbulence at the rear of the bomb acts on that portion of the retarder, pulling the remainder out of the housing. Ram air inflation is accomplished through four air inlet ports toward the aft end of the ballute. The weapon can be delivered in the low-drag mode (canister remains closed after release) or in the high drag mode. The pilot may select either a high drag or low drag configuration depending on mission requirements.
 
Status
The first post in this thread is a WikiPost, and can be edited by anyone with the appropriate permissions.
Top